The Faculty of Education has a longstanding national reputation for providing high-calibre initial teacher training with over 20 Secondary specialisms available. We have a well established partnership with over 800 secondary schools and colleges across the North West region and beyond.
Successful trainees are in demand to teach this national shortage subject and these routes will equip you with the skills and experience to teach at GCSE and A/AS levels, also on vocational courses. You will specialise in one aspect of design and technology, either Resistant Materials, Food or Textiles, depending on your degree subject and will be trained to teach a minor subject that you will be teaching to Key Stage 3.
A minimum of 120 days school based practice training is combined with university based training and periods of independent study. Trainees are supported throughout by university and placement mentors.
We will consider applications from people without a degree directly related to D&T if you have relevant industry experience. Subject to confirmation of DfE funding, we usually run free pre-entry Subject Knowledge Enhancement courses for national priority subjects, including Design and Technology. These will be identified at interview for applicants who need support in some areas and confirmed with a PGCE place offer.
This PGCE is available via University led and School Direct routes.
We also offer an Assessment-Only route to Qualified Teacher Status (QTS) aimed at experienced, but unqualified graduate teachers, wishing to complete a formal qualification.
1 year full-time (September to June)
UK and EU students
UK and EU students: Full-time fee: £9,250 per year. Tuition fees will remain the same for each year of your course providing you complete it in the normal timeframe (no repeat years or breaks in study).
Non-EU and Channel Island students
Non-EU international and Channel Island students: Full-time fee: £14,400 per year. Tuition fees will remain the same for each year of your course providing you complete it in the normal timeframe (no repeat years or breaks in study).
A Masters qualification typically comprises 180 credits, a PGDip 120 credits, a PGCert 60 credits, and an MFA 300 credits. Tuition fees will remain the same for each year of study provided the course is completed in the normal timeframe (no repeat years or breaks in study).
Optional Estimate: £400
Compulsory Estimate: £0 to 135 depending on your status. Please go to our DBS webpage for more details - http://www.mmu.ac.uk/dbs /
Optional Estimate: £28 a year for DATA membership
Features and benefits of the course
- State-of-the-art design and technology specialist teaching facilities
- Subject Knowledge Enhancement courses and minor subject training available (subject to DfE funding and eligibility)
- Experience in a diverse range of schools and colleges
- Opportunity to apply for enrichment experience overseas
- Choice of University led, School Direct or Assessment Only routes to Qualified Teacher Status
- Course includes 60 Masters Level CATS points, or one third of a Masters degree
- Access to NQT alumni support in your first year of teaching
- Close links with our Educational and Social Research Institute
School placements are central to the course. As an intending teacher you will begin by developing professional awareness, understanding and skills common to learning and teaching in a variety of settings. You will begin to understand the inter-relationship between the school and its community.
Placements will be in at least two different schools or colleges and will range from inner city to rural settings, mixed and single gender schools, City Academies, Comprehensives and Selective Schools, 11-16, 11-18, sixth form and further education colleges.
Trainees on School Direct routes will be attached to a particular school within an alliance of schools during their PGCE year.
Trainees also have the opportunity to apply for a four week enrichment experience overseas. These help to develop an international educational perspective and provide the chance to gain some teaching experience in an international school. Enrichment is in addition to PGCE units of study and opportunities may differ year on year, for example, in 2016 trainees were placed at British International Schools in Kazakhstan, Cyprus or Norway or public schools in Orleans, France.
About the course
This course will provide you with a critical framework for understanding recent developments in the Design and Technology curriculum. Taking account of your particular academic strengths and specialisms you will be prepared to teach National Curriculum Design & Technology and be equipped with an understanding of GCSE, A/AS Levels and vocational courses.
You will be supported in developing your subject knowledge through the use of a subject audit which identifies individual strengths and areas for development. Assignments and teaching experiences are designed to confirm your broad understanding of professional issues and confidence in your curriculum area.
As a major subject you will study either Food, Resistant Materials or Textiles Technology and support this with a minor subject study of either Food, Electronics or Textiles Technology.
This course includes:
- Practical sessions on aspects of the teaching and assessment of subjects within the Design and Technology curriculum area
- Full integration of Information Communication Technology as applied to the teaching of Design and Technology
- High levels of individual support from experienced subject tutors
- Opportunities to access activities at a national level through the professional contacts of the tutorial team
We aim to develop analytical, successful and enthusiastic beginning teachers who are fully aware of the excitement and challenges which lie ahead and who can work effectively in a variety of educational settings.
You will engage with current educational issues and recent and relevant research in order to further develop your understanding and to generate challenging and lively debate.
There will be a focus on:
- Promoting an inclusive learning and teaching environment
- Working in multi-professional teams
- Creating a climate for learning in the classroom
- Learning and teaching strategies
- Managing students' behaviour
- Planning and evaluating students' learning
- Developing knowledge and understanding of teachers' professional responsibilities
Typical units of study may include
Practice Credit 1 – Induction Phase
This unit runs during the first five weeks of the 36 week PGCE Programme. It is associated with eight full days of placement in a school or college. Where opportunity allows, you may also attend the placement in subject groups (or in pairs) and will have a programme of activities planned by University tutors in consultation with the Subject Mentors in the departments used for the placement. Most of the sessions in this unit will be scene-setting around schools, the curriculum, KS3 strategy and current issues, with a focus on addressing current developments in subject teaching that can be explored in the induction placement.
Practice Credit 2 – Teaching Placement Block A – Formation of Personal Practice
This unit runs during the Autumn Term for approximately eight weeks of the 36 week PGCE Programme. It is associated with 32 full days placement in a school or college. You will be allocated to subject departments in schools and colleges. They will follow a common pattern of placement-based activities but their progress through the unit will be based on a) gradualism and b) professional experience, needs and competence.
Practice Credit 3 – Teaching Placement Block B – Development of Personal Practice
This unit runs during the spring and summer terms for approximately 10 weeks of the 36 week PGCE Programme. It is associated with approximately 45 full days placement in a school or college. You will be allocated to subject departments in schools and colleges. You will then follow a common pattern of placement-based activities but your progress through the unit will be based on a) gradualism and b) professional experience, needs and competence.
Practice Credit 4 – Enrichment Phase
The Enrichment Unit requires you to demonstrate evidence that you have met all QTS Standards. In this case, the unit will provide you with challenging and innovative collaborative opportunities, both within and beyond your subject area, and in a variety of alternative settings. Indicative Standards that you may focus on for innovative practice include:
- Reflecting on and improving your practice, and taking responsibility for identifying and meeting your developing professional needs.
- A developed creative and constructively critical approach towards innovation, being prepared to adapt your practice where benefits and improvements are identified.
This unit seeks to develop and support the ‘Reflective Professional’ with a focus on your development of critical and reflective thinking in a mixed subject group. It will allow you to identify professional concerns and consider issues outside your subject-based ‘comfort-zone’ of knowledge and experience. It aims to strengthen the pedagogic and philosophical links between Subject and Professional and ‘Programme’ elements.
Subject Pedagogy (Design and Technology (Resistant Materials) / (Food and Textiles))
You can specialise in any of the D & T areas and gain knowledge during the course in the other materials. You will be taught in a state of the art building with specialist D & T rooms, which have a number of CAD/CAM machines, a laser cutter and 3D printer for your use. The teaching of design and electronics are also incorporated into all materials areas. This double-weighted unit seeks to develop your ability to reconceptualise your knowledge and understanding in the subject and to apply this to your planning, preparation and classroom teaching in an effective manner. You are supported by excellent staff at university and teachers in schools who will help to build your subject knowledge and confidence in your subject. Teaching pupils to design and make is a very rewarding experience and you will be guided to develop your own style of teaching during the course.
This unit is designed to extend your interest, knowledge and confidence in your subject, as a subject within the curriculum and to extend your development of an analytical and critical attitude towards the teaching and learning of your subject in classroom, group and individual contexts. This unit will develop your understanding of pupils’ response to teaching strategies, to help you to plan for a gradualist approach to teaching and the broadening context of your experiences.
Each programme of study that we offer undergoes an annual review to ensure an up-to-date curriculum supported by the latest online learning technology. In addition, we undertake a major review of the programme, normally at 6-yearly intervals, but this can take place at a more frequent interval where required. Applicants should note that the programme currently provided may be subject to change as a result of the review process. We only make changes where we consider it necessary to do so or where we feel that certain changes are in the best interests of students and to enhance the quality of provision. Occasionally, we have to make changes for reasons outside our control. Where there are changes which may materially affect the current programme content and/or structure, offer holders will be informed.
Our PGCE Secondary programme combines practical teaching experience with written assignments. Trainees will complete a portfolio detailing their Record of Professional Development and a Career Entry Profile. Satisfactory attendance and professional engagement with the programme are also necessary factors in the successful completion of your chosen route.
Additional Information About this Course
Fitness to teach - You will be required to complete an Occupational Health Assessment to ensure that your health does not constitute a barrier to the achievement of the programme learning outcomes or eligibility to apply for registration with the professional body. This will require the completion of a health questionnaire before or during the first few weeks of your course, followed by an occupational health screening appointment if required. Travel costs to appointments (which will be within the Greater Manchester area) will not be covered by the University. Professional Suitability - Students on programmes leading to professional qualifications are required to adhere to professional standards and codes of practice during their studies. Failure to do so may lead to exclusion from the programme on the grounds of professional unsuitability. Students will be briefed about the requirements at the start of their studies. Course specific regulations - Professional, Statutory and Regulatory Bodies require students to achieve results that demonstrate their ability to practise safely.
Your studies are supported by a team of committed and enthusiastic teachers and researchers, experts in their chosen field. We also work with external professionals, many of whom are Manchester Met alumni, to enhance your learning and appreciation of the wider subject. Details of departmental staff can be found at: http://www2.mmu.ac.uk/stepd/staff/
Why study in Manchester?
Manchester - a truly international city
Manchester is an international city, with world class transport and infrastructure, not only to regional locations, but nationally and globally. Home to one of the largest international airports, Manchester really is a gateway to the world.
Building on our impressive location and accessibility, we are a University with big ambitions. With a recent £350m investment in our facilities we have provided impressive new facilities for the School of Art, Hollings, Business and Law and most recently the superb £139m Brooks Building, home to the faculties of Education and of Health, Psychology and Social Care. With our investment, we have modernised the student experience, providing state of the art facilities and equipment to support you in your studies.
Located at the heart of the thriving and cosmopolitan Manchester City Centre our Manchester Campus is home to over 30,000 students and provides a fantastic student experience- the combination of a dynamic academic centre and a vibrant, cultural and social scene attracting students from across the world.
Why study at Manchester Met?
Manchester Metropolitan University is placed in the top 3% of global universities and with an international student population of over 3,000, the University hosts students from over 130 countries and has a strong global presence. The Universitys extensive international student population is supported throughout the entire student journey, from application, pre-arrival and induction and during study. For more information on international student support please visit www.mmu.ac.uk/international.
We are experts in teaching, enterprise and research, providing international students with the academic experience and professional support they need to achieve their goals. Our academic teaching staff, professors and researchers are experienced professionals at the forefront of their fields, with well-established links in their area of expertise. The University's Education and Social Research Institute is one of the leading UK centres for educational research. 67% of our research was rated as 'world leading' or 'internationally excellent' in the 2014 Research Excellence Framework, with 100% of our research impact being rated as 'world leading' or 'internationally excellent'.
The Faculty of Education has a well-established partnership with over 1,500 schools, colleges and a wide range of other educational organisations allowing for rich knowledge exchange activity and engagement in diverse community based projects.
The award winning Brooks Building is home to the Faculty of Education and the Faculty of Health, Psychology and Social Care, providing superb specialist facilities for the education of teachers, those working with children and young people in related professions, such as Early Years, Inclusive Education and SEND and Youth and Community Work, as well as those interested in the broader sphere of Education, alongside , Nurses, Psychologists, Social Workers, Physiotherapists and those working in allied Health professions.
A community campus, the ground floor is open to the public and provides a drama studio and dance space, sporting and social facilities, cafés and green spaces for individual study, meetings and informal group working. There is also a Physiotherapy and Acupuncture clinic.
The upper four floors provide specialist teaching equipment and facilities such as
- Student Resource Centre, including 'making' area to practice classroom skills
- Art and Design gallery space and studios
- Music performance and practice spaces
- Design and Technology workshops for resistant materials, textiles and food specialisms
- Computing with ICT
- Science laboratories
Dedicated student support
The Faculty of Education has a dedicated student hub on the ground floor of the Brooks Building providing a wide range of support services and advice. A Careers and Employabilty Service is also available at the Business School, offering a host of information resources, one-to-one careers support and employability events throughout the year.
Get involved in university life
As a student in Manchester, you can join a range of student societies which are run by the Students' Union. These include many sport and special interest societies and the International Society.
Enjoy everything Manchester has to offer
Manchester is one of the most extensive higher education centres in Europe and second only to London as the most popular city for students in the UK. Our city centre campus is perfectly placed for you to enjoy this unforgettable city and our home in the Brooks Building, is just a short walk from the retail and cultural heart of the city centre.
The city and region are well served by motorways and reliable public transport, so other cities are within easy reach and London is only a two hour train journey away. Manchester International Airport is just 10 miles (16km) south of the city centre, with flights to a huge variety of European and International destinations.
Living in Manchester
Manchester is world famous for its football, legendary music and a thriving arts and cultural scene with many museums, galleries and festivals to explore. The city is a hive of creativity and inspiration due to its rich industrial heritage and offers a vibrant and cosmopolitan quality of life. That is why Manchester was voted UKs most liveable city in 2015.
Find out more about what Manchester has to offer.
Campus accommodation is available for postgraduate students. There are also a number of nearby districts and suburbs popular with students wishing to live in privately owned accommodation.
Typical entry requirements
Successful applicants will usually hold an undergraduate honours degree awarded by a UK university, or an equivalent higher education qualification. A minimum 2:2 (Hons) degree in a relevant subject. At least 50% of your degree needs to be relevant to Design and Technology.
For exceptional candidates, particularly those with substantial relevant work experience in schools or relevant occupations, we will consider applications from those who hold a 3rd class degree.
You will also need GCSEs at grade C or above in English Language and Mathematics. However, applicant are able to apply with GCSEs pending for this course and in exceptional circumstances MMU GCSE Equivalency tests may be offered. This will be at the discretion of the admissions tutor and will only be offered if considered appropriate after interview
Experience in educational settings
Prior to applying to Manchester Met, it is valuable to draw upon your experience in different learning contexts. This can be evidenced in several ways, such as time spent in schools or colleges, relevant practical experience in industry, voluntary organisations and other settings.
You should clearly reference this experience in your application and comment on the insights you have gained into the professional teaching role.
Professional skills tests in Numeracy and Literacy
All PGCE applicants will need to pass pre-entry Professional Skills Tests in Numeracy and Literacy. We recommend you check the Department of Education website at www.education.gov.uk/get-into-teaching for the latest updates.
Disclosure and Barring Service Check and DfE Fitness to Teach test are also required.
There’s further information for international students on our international website if you’re applying with non-UK qualifications.
How do I apply for this course?
UCAS Code (Resistant Materials): W9X1
UCAS Code (Food & Textiles): D6X1
Applications for University led and School Direct PGCE routes should be made online via UCAS Teacher Training, www.ucas.com for 2017 entry.
Career options after the course
In recent years our Design and Technology postgraduates have been very successful in securing first teaching posts in schools and colleges across the United Kingdom and further afield. Full support is provided by tutors in helping you to prepare letters of application and interview presentations.
98.6% of our PGCE Secondary Leavers* were in work and or further study within six months of graduating (Destination of Leavers in Higher Education survey 2014/15.
The Faculty of Education also provides an extensive, flexible, part-time continuing professional development programme which includes: STEM Masters, MAs in Education, Inclusive Education and Special Educational Needs and Educational Leadership and Management.
* Of those who responded to the DLHE survey and were available for work.
Confirmation of Regulator
The Higher Education Funding Council for England is the principal regulator for the University.
This online prospectus provides an overview of our programmes of study and the University. We regularly update our online prospectus so that our published course information is accurate and up to date. Please note that our programmes are subject to review and development on an ongoing basis. Changes may sometimes be necessary. For example, to comply with the requirements of professional or accrediting bodies or as a result of student feedback or external examiners’ reports. We also need to ensure that our courses are dynamic and current and that the content and structure maintain academic standards and enhance the quality of the student experience.
Please check back to the online prospectus before making an application to us.
The provision of education by the University is subject to terms and conditions of enrollment and contract. The current Terms and Conditions Applicable to the provision of the University’s Educational Services are available online. When a student enrolls with us, their study and registration at the University will be governed by various regulations, policies and procedures. It is important that applicants/students familiarize themselves with our Terms and Conditions and the Key Contract Documents referred to within. Applicants will be provided with access to an up to date version at offer stage. This can be found within the Information for Offer Holders document.