Mathemetic Methods 1 for Level 4;
Engineering Mechanics-Fluid Mechanics for Level 4;
Thermodynamics and Fluid Mechanics for Level 5;
Bioengineering for Level 7;
BEng, MSc, PhD, PgCert, FHEA, CENG,MIEEE
05.2012-To date, Lecturer and Senior in Mechanical Engineering; Manchester Metropolitan University;
02.2010-05.2012, Research Fellow, University of Srathclyde;
02.2009-02.2010, Research Associate, Louborough University;
English and Chinese
Mathematical Methods 1
Engineering Mechanics: Fluid Mechanics
Thermodynamics and Fluid Mechanics
Final Year Project
Bioengineering
MSc postgraduate project supervision
PhD project supervision
MSc postgradaute project supervision for project: Mechanisms of Ruptur of Aorta Under the Impact Loading
PhD project supervision for the project: Mechanisms of Stable and Vulnerable Plaques based on Arterial Waveforms
Cardiovascular Mechanics, Blood Wave Propagation, Injury MechanimsFE modelling for surface damage performanceAgeing Driver Model
Y. Liao, H. Yuan, Z. Lian, J. Feng, Y. Guo (2015). Research and analysis of the hysteresis characteristics of a large flow directional valve. Journal of Mechanical Engineering (Strojniski Vestnik). 61(6), pp.355-364.
JL. Feng, Y. Qin (2014). Load Bearing Capacity Investigation and Coating Failure Mechanism for Coated Spur Gears. Applied Mechanics and Materials. 446-447, pp.491-496.
X. Wang, Z. Yang, J. Feng, H. Liu (2013). Stress analysis and stability analysis on doubly-telescopic prop of hydraulic support. Engineering Failure Analysis. 32, pp.274-282.
J. Feng, Y. Qin, TW. Liskiewicz, BD. Beake, S. Wang (2021). Crack propagation of a thin hard coating under cyclic loading: Irreversible cohesive zone model. Surface and Coatings Technology. 426,
J. Kendall, F. Serracino-Inglott, C. Banks, P. Jamshidi, M. Attallah, et al. J. Feng. (2019). In-vitro Study of Effect of the Design of the Stent on the Arterial Waveforms. Procedia Structural Integrity. 15, pp.33-40.
M. Abdulsalam, J. Feng (2019). Distinguish the Stable and Unstable Plaques Based on Arterial Waveform Analysis. Procedia Structural Integrity. 15, pp.2-7.
Y. Liao, Z. Lian, H. Yuan, J. Feng, H. Cui (2019). Optimization of an intrinsically safe solenoid valve and the static and dynamic characteristics. International Journal of Applied Electromagnetics and Mechanics. 61(1), pp.111-122.
Y. Li, J. Chen, L. Wang, Y. Guo, J. Feng, et al. W. Chen. (2018). Experimental Verification of the Elastic Formula for the Aspirated Length of a Single Cell Considering the Size and Compressibility of Cell During Micropipette Aspiration. Annals of Biomedical Engineering. 46(7), pp.1026-1037.
Y. Liao, Z. Lian, J. Feng, H. Yuan, R. Zhao (2018). Effects of multiple factors on water hammer induced by a large flow directional valve. Strojniski Vestnik/Journal of Mechanical Engineering. 64(5), pp.329-338.
L. Chen, Z. Gao, B. Liu, Y. LV, M. An, et al. J. Feng. (2018). Circumferential variation in mechanical characteristics of porcine descending aorta. BIOCELL. 42(1), pp.25-34.
S. Sun, L. Xie, P. Kelly, R. Long, M. Li, et al. J. Feng. (2017). The Influence of Rotating Direction on the Tribological Behavior of Grey Cast Iron with Curve Distributed Pit Textured Surface. Mathematical Problems in Engineering. 2017,
J. Feng, S. Wang, J. Guo Lin (2016). Multi-resolution material hardening law for CPFE micro-forming analysis. Key Engineering Materials. 716, pp.232-239.
J. Feng, Y. Qin, H. Dong (2016). Investigation into initiation and propagation of cracks in the coated surfaces of spur gears with submodelling and irreversible cohesive-zone modelling techniques. Manufacturing Review. 3, pp.6-6.
Y. Liao, H. Yuan, Z. Lian, J. Feng, Y. Guo (2015). Research and analysis of the hysteresis characteristics of a large flow directional valve. Journal of Mechanical Engineering (Strojniski Vestnik). 61(6), pp.355-364.
JL. Feng, Y. Qin (2014). Load Bearing Capacity Investigation and Coating Failure Mechanism for Coated Spur Gears. Applied Mechanics and Materials. 446-447, pp.491-496.
D. Yin, Z. Xu, J. Feng, Y. Qin (2014). Numerical Modelling of Multilayered Coatings – Latest Developments and Applications. Manufacturing Review. 1, pp.8-8.
X. Wang, Z. Yang, J. Feng, H. Liu (2013). Stress analysis and stability analysis on doubly-telescopic prop of hydraulic support. Engineering Failure Analysis. 32, pp.274-282.
X. Wang, Z. Yang, X. Shu, J. Feng (2013). The static contact statuses between granular materials and flat-bottomed steel silos. Powder Technology. 235, pp.1053-1059.
BS. Acar, J. Feng, V. Esat (2013). Investigation into suitability of current ATDs to represent ageing drivers. International Journal of Crashworthiness. 18(1), pp.1-10.
J. Feng, Y. Qin, R. Raghavan, J. Michler, E. Almandoz, et al. GG. Fuentes. (2012). New technique for determining the critical loads of a thin coating on a tool–steel substrate by considering the initiation of cracks in the coating. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 226(7), pp.1205-1212.
D. Yin, X. Peng, Y. Qin, J. Feng, Z. Wang (2011). Quantifying adhesion energy of mechanical coatings at atomistic scale. Applied Surface Science. 258(4), pp.1451-1455.
J. FENG, Y. QIN, Q. ZENG, E. ALMANDOZ, G. FUENTE, et al. H. DONG, R. RAGHAVAN, J. MICHLER. (2011). PARAMETERIZED FINITE ELEMENT MODELING OF THE SURFACE SYSTEMS WITH COATINGS WHICH CONSIDERS THE CRACKING OF THE COATINGS AND INFLUENCES OF THE CASE-HARDENING OF THE SUBSTRATE. Journal of Multiscale Modelling. 03(01n02), pp.1-22.
J. Feng, AW. Khir (2010). Determination of wave speed and wave separation in the arteries using diameter and velocity. Journal of Biomechanics. 43(3), pp.455-462.
J. Feng, AW. Khir (2008). The compression and expansion waves of the forward and backward flows: an in-vitro arterial model. Proc Inst Mech Eng H. 222(4), pp.531-542.
AW. Khir, N. Hadjiloizou, J. Feng, JE. Davies, J. Mayet, et al. DP. Francis, AD. Hughes. P1.35 A NEW NON-INVASIVE ANALYSIS FOR THE DETERMINATION OF LOCAL PULSE WAVE VELOCITY AND WAVE INTENSITY: APPLICATION TO THE CAROTID ARTERY. Artery Research. 2(3), pp.100-100.
AW. Khir, MJP. Swalen, J. Feng, KH. Parker (2007). Simultaneous determination of wave speed and arrival time of reflected waves using the pressure-velocity loop. Med Biol Eng Comput. 45(12), pp.1201-1210.
J. Feng, Q. Long, AW. Khir (2007). Wave dissipation in flexible tubes in the time domain: in vitro model of arterial waves. J Biomech. 40(10), pp.2130-2138.
S. Wang, J. Feng, Z. Yang (1999). Two active plane finite element model in Mohr–Coulomb elastoplasticity. Finite Elements in Analysis and Design. 32(4), pp.213-219.
J. Feng, T. Rajeswaran, S. He, FL. Wilkinson, F. Serracino-Inglott, et al. M. Azzawi, V. Parikh, M. Miraftab, MY. Alexander. (2015). Investigation of the composition of arterial plaques based on arterial waveforms and material properties. In: Annu Int Conf IEEE Eng Med Biol Soc. United States, 25/8/2015. pp.993-996.
J. Feng, Y. Qin, H. Dong (2015). Investigation of the initiation and propagation of cracks in the coated surface of spur gear: An application of irreversible cohesive zone model. In: MATEC Web of Conferences. pp.12005-12005.
J. Feng, Y. Qin, R. Raghavan, J. Michler (2011). Effect of the plasticity of the substrate on the performance of the coating on a tool. In: Proceedings of the 10th International Conference on Technology of Plasticity, ICTP 2011. pp.1259-1264.
J. Feng (2011). A Generic Model for the Analysis of the Failures of Multilayered Coatings on Tools and Engineering Components. Glasgow, UK,
J. Feng (2011). Effect of Substrate's Plasticity on the Performance of the Coating on a Tool Steel. In: Proceedings of 10th ICTP, 2011. Archen, Germany, pp.1259-1264.
J. Feng, AW. Khir (2007). Determination of wave intensity in flexible tubes using measured diameter and velocity. In: Annu Int Conf IEEE Eng Med Biol Soc. United States, 22/8/2007. pp.985-988.
J. Feng, AW. Khir (2007). The Dissipation of Suction Waves in Flexible Tubes. In: ASME 2007 Summer Bioengineering Conference. 20/6/2007. pp.499-500.
J. Feng, AW. Khir (2007). The Dissipation of Suction Waves in Flexible Tubes. In: IFMBE Proceedings. pp.278-281.
J. Feng, AW. Khir (2005). A new approach to investigate wave dissipation in viscoelastic tubes: application of Wave Intensity Analysis. In: 2005 IEEE Engineering in Medicine and Biology 27th Annual Conference. 17/1/2006. pp.2260-2263.
Editorial Board and Reviewer, International Journal of Cardiovascular and Cerebrovascular Disease
Reviewer in Shock and Vibration